Page 1 of 1

X problem with video card

Posted: Wed Feb 03, 2010 8:27 am
by mythtv101
Cannot see anything once ram loading is complete. Connected via HDMI onto a Pioneer Plasma TV set Please help

1. lspci

00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GHM (ICH7-M DH) LPC Interface Bridge (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
02:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller
03:02.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link)

2. cat /var/log/messages

Feb 2 23:16:56 (none) local0.info minimyth: fetching 'confrw:themecache.sfs': URL 'file:/minimyth/conf-rw/mf1+themecache.sfs' not fetched (it may not exist).
Feb 2 23:16:56 (none) local0.warn minimyth: certain DVDs may not play. see <http://mf1/minimyth/document-faq.html#dvd>
Feb 2 23:16:56 (none) local0.info minimyth: generating GTK related configuration files ...
Feb 2 23:16:56 (none) local0.info minimyth: configuring X ...
Feb 2 23:16:56 (none) local0.info minimyth: starting X ...
Feb 2 23:16:56 (none) local0.info minimyth: starting X
Feb 2 23:16:56 (none) auth.notice su: + none root:minimyth
Feb 2 23:16:56 (none) local0.info minimyth: stopping splash screen
Feb 3 07:16:56 (none) daemon.info init: no more processes left in this runlevel
Feb 2 23:17:00 (none) local0.info mythfrontend: QIconvCodec::convertFromUnicode: using ASCII for conversion, iconv_open failed
Feb 2 23:17:00 (none) local0.info mythfrontend: QIconvCodec::convertToUnicode: using ASCII for conversion, iconv_open failed
Feb 2 23:17:00 (none) auth.info login[4899]: root login on 'pts/0'
Feb 2 23:17:01 (none) local0.info mythfrontend: 2010-02-02 23:17:01.151 mythfrontend version: branches/release-0-22-fixes [Unknown] www.mythtv.org
Feb 2 23:17:01 (none) local0.info mythfrontend: 2010-02-02 23:17:01.169 Using runtime prefix = /usr
Feb 2 23:17:01 (none) local0.info mythfrontend: 2010-02-02 23:17:01.170 Using configuration directory = /home/minimyth/.mythtv
Feb 2 23:17:01 (none) local0.info mythfrontend: 2010-02-02 23:17:01.922 Using localhost value of mf1
Feb 2 23:17:01 (none) local0.info mythfrontend: 2010-02-02 23:17:01.922 Testing network connectivity to '10.25.25.160'
Feb 2 23:17:01 (none) local0.info mythfrontend: 2010-02-02 23:17:01.954 New DB connection, total: 1
Feb 2 23:17:01 (none) local0.info mythfrontend: 2010-02-02 23:17:01.993 Connected to database 'mythconverg' at host: 10.25.25.160
Feb 2 23:17:01 (none) local0.info mythfrontend: 2010-02-02 23:17:01.994 Closing DB connection named 'DBManager0'
Feb 2 23:17:02 (none) local0.info mythfrontend: 2010-02-02 23:17:02.011 DPMS is disabled.
Feb 2 23:17:02 (none) local0.info mythfrontend: 2010-02-02 23:17:02.013 Primary screen: 0.
Feb 2 23:17:02 (none) local0.info mythfrontend: 2010-02-02 23:17:02.043 Connected to database 'mythconverg' at host: 10.25.25.160
Feb 2 23:17:02 (none) local0.info mythfrontend: 2010-02-02 23:17:02.061 Using screen 0, 720x480 at 0,0
Feb 2 23:17:02 (none) local0.info mythfrontend: 2010-02-02 23:17:02.192 MythUI Image Cache size set to 20971520 bytes
Feb 2 23:17:02 (none) local0.info mythfrontend: 2010-02-02 23:17:02.192 Enabled verbose msgs: important general
Feb 2 23:17:02 (none) local0.info mythfrontend: 2010-02-02 23:17:02.333 Primary screen: 0.
Feb 2 23:17:02 (none) local0.info mythfrontend: 2010-02-02 23:17:02.359 Using screen 0, 720x480 at 0,0
Feb 2 23:17:02 (none) local0.info mythfrontend: 2010-02-02 23:17:02.361 Using theme base resolution of 800x600
Feb 2 23:17:02 (none) local0.info mythfrontend: 2010-02-02 23:17:02.579 LIRC: Successfully initialized '/var/run/lirc/lircd' using '/home/minimyth/.mythtv/lircrc' config
Feb 2 23:17:02 (none) local0.info mythfrontend: 2010-02-02 23:17:02.579 JoystickMenuThread Error: Joystick disabled - Failed to read /home/minimyth/.mythtv/joystickmenurc
Feb 2 23:17:03 (none) local0.info mythfrontend: 2010-02-02 23:17:03.538 Using the Qt painter
Feb 2 23:17:03 (none) local0.info mythfrontend: 2010-02-02 23:17:03.559 Loaded base theme from /usr/share/mythtv/themes/blue/base.xml
Feb 2 23:17:03 (none) local0.info mythfrontend: 2010-02-02 23:17:03.826 Loaded base theme from /usr/share/mythtv/themes/default/base.xml
Feb 2 23:17:03 (none) local0.info mythfrontend: 2010-02-02 23:17:03.866 New DB connection, total: 2
Feb 2 23:17:03 (none) local0.info mythfrontend: 2010-02-02 23:17:03.912 Connected to database 'mythconverg' at host: 10.25.25.160
Feb 2 23:17:03 (none) local0.info mythfrontend: 2010-02-02 23:17:03.915 New DB connection, total: 3
Feb 2 23:17:03 (none) local0.info mythfrontend: 2010-02-02 23:17:03.952 Current MythTV Schema Version (DBSchemaVer): 1244
Feb 2 23:17:03 (none) local0.info mythfrontend: 2010-02-02 23:17:03.978 Connected to database 'mythconverg' at host: 10.25.25.160
Feb 2 23:17:06 (none) local0.info mythfrontend: 2010-02-02 23:17:06.158 Desktop video mode: 720x480 85.0123 Hz
Feb 2 23:17:10 (none) local0.info mythfrontend: 2010-02-02 23:17:10.702 Registering Internal as a media playback plugin.
Feb 2 23:17:10 (none) local0.info mythfrontend: 2010-02-02 23:17:10.820 Registering WebBrowser as a media playback plugin.
Feb 2 23:17:11 (none) local0.info mythfrontend: 2010-02-02 23:17:11.544 MonitorRegisterExtensions(0x100, gif,jpg,png)
Feb 2 23:17:11 (none) local0.info mythfrontend: 2010-02-02 23:17:11.974 Current MythMusic Schema Version (MusicDBSchemaVer): 1017
Feb 2 23:17:13 (none) local0.info mythfrontend: 2010-02-02 23:17:13.221 MonitorRegisterExtensions(0x40, mp3,mp2,ogg,oga,flac,wma,wav,ac3,oma,omg,atp,ra,dts,aac,m4a,aa3,tta,mka,aiff,swa,wv)
Feb 2 23:17:14 (none) local0.info mythfrontend: 2010-02-02 23:17:14.016 Current MythVideo Schema Version (mythvideo.DBSchemaVer): 1028

3. mythfront end seems to be running

Thanks a bunch

Re: X problem with video card

Posted: Wed Feb 03, 2010 3:18 pm
by Pablo
Could you provide the output of "lspci -mn"?

Do you see anything obvious in /var/log/Xorg.0.0.log?

Re: X problem with video card

Posted: Thu Feb 04, 2010 8:26 am
by mythtv101
Thanks. Output of lspci -mn

00:00.0 "0600" "8086" "27a0" -r03 "147b" "1075"
00:02.0 "0300" "8086" "27a2" -r03 "147b" "1075"
00:02.1 "0380" "8086" "27a6" -r03 "147b" "1075"
00:1b.0 "0403" "8086" "27d8" -r02 "147b" "1075"
00:1c.0 "0604" "8086" "27d0" -r02 "" ""
00:1c.1 "0604" "8086" "27d2" -r02 "" ""
00:1d.0 "0c03" "8086" "27c8" -r02 "147b" "1075"
00:1d.1 "0c03" "8086" "27c9" -r02 "147b" "1075"
00:1d.2 "0c03" "8086" "27ca" -r02 "147b" "1075"
00:1d.3 "0c03" "8086" "27cb" -r02 "147b" "1075"
00:1d.7 "0c03" "8086" "27cc" -r02 -p20 "147b" "1075"
00:1e.0 "0604" "8086" "2448" -re2 -p01 "" ""
00:1f.0 "0601" "8086" "27bd" -r02 "8086" "27bd"
00:1f.2 "0101" "8086" "27c4" -r02 -p80 "147b" "1075"
00:1f.3 "0c05" "8086" "27da" -r02 "147b" "1075"
02:00.0 "0200" "8086" "109a" "147b" "1075"
03:02.0 "0c00" "104c" "8023" -p10 "147b" "1075"


Xorg.0.0.log ->>


Lots of stuff I cannot understand. Anyway to attach a file in this forum.

Re: X problem with video card

Posted: Sun Feb 14, 2010 3:10 am
by mythtv101
Output of Xorg.0.0.log

(II) config/udev: Adding input device "Power Button" (/dev/input/event1)
(**) "Power Button": always reports core events
(**) "Power Button": Device: "/dev/input/event1"
(II) "Power Button": Found keys
(II) "Power Button": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Power Button"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device "HDA Digital PCBeep" (/dev/input/event3)
(**) "HDA Digital PCBeep": always reports core events
(**) "HDA Digital PCBeep": Device: "/dev/input/event3"
(WW) "HDA Digital PCBeep": Don't know how to use device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""HDA Digital PCBeep""
(II) config/udev: Adding input device "iMON PAD IR Mouse (15c2:ffdc)" (/dev/input/event2)
(**) "iMON PAD IR Mouse (15c2:ffdc)": always reports core events
(**) "iMON PAD IR Mouse (15c2:ffdc)": Device: "/dev/input/event2"
(II) "iMON PAD IR Mouse (15c2:ffdc)": Found 9 mouse buttons
(II) "iMON PAD IR Mouse (15c2:ffdc)": Found scroll wheel(s)
(II) "iMON PAD IR Mouse (15c2:ffdc)": Found relative axes
(II) "iMON PAD IR Mouse (15c2:ffdc)": Found x and y relative axes
(II) "iMON PAD IR Mouse (15c2:ffdc)": Configuring as mouse
(**) "iMON PAD IR Mouse (15c2:ffdc)": YAxisMapping: buttons 4 and 5
(**) "iMON PAD IR Mouse (15c2:ffdc)": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""iMON PAD IR Mouse (15c2:ffdc)"" (type: MOUSE)
(**) "iMON PAD IR Mouse (15c2:ffdc)": (accel) keeping acceleration scheme 1
(**) "iMON PAD IR Mouse (15c2:ffdc)": (accel) filter chain progression: 2.00
(**) "iMON PAD IR Mouse (15c2:ffdc)": (accel) filter stage 0: 20.00 ms
(**) "iMON PAD IR Mouse (15c2:ffdc)": (accel) set acceleration profile 0
(II) "iMON PAD IR Mouse (15c2:ffdc)": initialized for relative axes.
(II) config/udev: Adding input device "iMON PAD IR Mouse (15c2:ffdc)" (/dev/input/mouse0)
(**) "iMON PAD IR Mouse (15c2:ffdc)": always reports core events
(**) "iMON PAD IR Mouse (15c2:ffdc)": Device: "/dev/input/mouse0"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""iMON PAD IR Mouse (15c2:ffdc)""
(II) config/udev: Adding input device (null) (/dev/input/mice)
(**) (unnamed): always reports core events
(**) (unnamed): Device: "/dev/input/mice"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for "(unnamed)"
(EE) intel(0): Unable to write to SDVOCTRL_E for SDVOB Slave 0x70.
(II) intel(0): EDID vendor "PIO", prod id 0
config/udev: unhandled action change
GetModeLine - scrn: 0 clock: 36000
GetModeLine - hdsp: 640 hbeg: 696 hend: 752 httl: 832
vdsp: 480 vbeg: 481 vend: 484 vttl: 509 flags: 10
(EE) intel(0): Unable to write to SDVOCTRL_E for SDVOB Slave 0x70.
(EE) intel(0): Unable to write to SDVOCTRL_E for SDVOB Slave 0x70.
(II) intel(0): EDID vendor "PIO", prod id 0
config/udev: unhandled action change
(EE) intel(0): Unable to write to SDVOCTRL_E for SDVOB Slave 0x70.
(EE) intel(0): Unable to write to SDVOCTRL_E for SDVOB Slave 0x70.
(II) intel(0): EDID vendor "PIO", prod id 0


Please help. Thanks

Re: X problem with video card

Posted: Mon Feb 15, 2010 3:40 am
by Pablo
How are you connecting (e.g. VGA)?

If you telnet/ssh into the frontend, run the commands

Code: Select all

mm_service x stop
rm /etc/X11/xorg.conf
mm_service x start
then does it work?

Re: X problem with video card

Posted: Mon Feb 15, 2010 6:39 am
by mythtv101
Tried did not work. Connecting via VGA and HDMI. In both cases can only see the output on the screen till RAM loads up then blank screen. Loaded Puppy Linux from CD-ROM correctly. So seems like X issue. Cannot figure out what. Thanks

Re: X problem with video card

Posted: Sun Feb 21, 2010 2:22 am
by mythtv101
Pablo,

Is it possible to have a test version with X version 1.7.4. I believe the correct driver is not being picked up for Intel 945GM. Xorg.cong indicates intel 915. Not sure if that makes a difference. Thanks

Re: X problem with video card

Posted: Mon Feb 22, 2010 6:04 am
by mythtv101
The problem is with hdmi output only the vga output works fine.

Re: X problem with video card

Posted: Wed Feb 24, 2010 3:44 am
by Pablo
Here is a version built with xorg-server 1.7.5.

Re: X problem with video card

Posted: Sat Mar 06, 2010 6:09 am
by mythtv101
Thanks. Did not work on the HDMI output - maybe I do not have the right settings in the conf file to make it work on HDMI output. It did go further along though and started switching between different modes (blank all the time). Also observed the following -

1. For some reason the remote was extra sensitive
2. The screen always had a blue line on the top but I also started getting a flickering green band on the bottom - intermittent.

Will revert back to stable release ans work on the VGA output instead of HDMI output.