Trust wireless keyboard KB-2950

Ask for hardware advice here

Moderator: Pablo

Post Reply
tcrnek
New Member
Posts: 7
Joined: Sat May 05, 2007 6:20 pm

Trust wireless keyboard KB-2950

Post by tcrnek » Sun Jun 28, 2009 6:37 pm

Hi,

I am using PXE+NFS version of MiniMyth on EPIA SP8000 board. Recently I bought one Trust wireless keyboard KB-2950 that I want to use as remote keyboard with MiniMyth. This keyboard uses one small USB receiver on PC side.

The keyboard works fine, EPIA recognizes it as the keyboard.
But, when MiniMyth boots, after X starts, MiniMyth is not responding to keyboard any more.
Can anyone tell me what and where must be set in order that X uses this keyboard?

http://www.trust.com/products/product.aspx?artnr=14909

Pablo
Site Admin
Posts: 4182
Joined: Tue Dec 14, 2004 2:13 am
Location: La Jolla
Contact:

Re: Trust wireless keyboard KB-2950

Post by Pablo » Mon Jun 29, 2009 11:14 pm

With the keyboard connected:
What is the output of lspci?
What is the output of 'cat /proc/bus/input/devices'?
MiniMyth running on an Acer ApireRevo 3610 and a Zotac ZBOX-ID80-U. Find out more at my MythTV page.

tcrnek
New Member
Posts: 7
Joined: Sat May 05, 2007 6:20 pm

Re: Trust wireless keyboard KB-2950

Post by tcrnek » Thu Jul 02, 2009 12:47 am

Hi Pablo,
here it is:

root@mythfrontend01:~ # lspci
00:00.0 Host bridge: VIA Technologies, Inc. CN333/CN400/PM880 Host Bridge
00:00.1 Host bridge: VIA Technologies, Inc. CN333/CN400/PM880 Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. CN333/CN400/PM880 CPU Host Bridge
00:00.3 Host bridge: VIA Technologies, Inc. CN333/CN400/PM880 Host Bridge
00:00.4 Host bridge: VIA Technologies, Inc. CN333/CN400/PM880 Host Bridge
00:00.7 Host bridge: VIA Technologies, Inc. CN333/CN400/PM880 Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237/VX700 PCI Bridge
00:0d.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306 Fire II IEEE 1394 OHCI Link Layer Controller (rev 80)
00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)
00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South]
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 78)
01:00.0 VGA compatible controller: VIA Technologies, Inc. CN400/PM800/PM880/PN800/PN880 [S3 UniChrome Pro] (rev 02)

root@mythfrontend01:~ # cat /proc/bus/input/devices
I: Bus=0019 Vendor=0000 Product=0002 Version=0000
N: Name="Power Button (FF)"
P: Phys=LNXPWRBN/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
U: Uniq=
H: Handlers=kbd event0
B: EV=3
B: KEY=100000 0 0 0

I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button (CM)"
P: Phys=PNP0C0C/button/input0
S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
U: Uniq=
H: Handlers=kbd event1
B: EV=3
B: KEY=100000 0 0 0

I: Bus=0019 Vendor=0000 Product=0003 Version=0000
N: Name="Sleep Button (CM)"
P: Phys=PNP0C0E/button/input0
S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
U: Uniq=
H: Handlers=kbd event2
B: EV=3
B: KEY=4000 0 0 0 0

Pablo
Site Admin
Posts: 4182
Joined: Tue Dec 14, 2004 2:13 am
Location: La Jolla
Contact:

Re: Trust wireless keyboard KB-2950

Post by Pablo » Thu Jul 02, 2009 5:28 am

Oops the second question should have been "What is the output of lsusb?" Could you provide that as well?

It is odd that the device does not appear in /proc/bus/input/devices. It makes me think that the driver for the device is not present.
MiniMyth running on an Acer ApireRevo 3610 and a Zotac ZBOX-ID80-U. Find out more at my MythTV page.

tcrnek
New Member
Posts: 7
Joined: Sat May 05, 2007 6:20 pm

Re: Trust wireless keyboard KB-2950

Post by tcrnek » Thu Jul 02, 2009 11:54 pm

root@mythfrontend01:~ # lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 04fc:05d8 Sunplus Technology Co., Ltd
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

I think this "Sunplus Technology" is the keyboard, as it is here present only when the usb receiver is inserted.

Pablo
Site Admin
Posts: 4182
Joined: Tue Dec 14, 2004 2:13 am
Location: La Jolla
Contact:

Re: Trust wireless keyboard KB-2950

Post by Pablo » Sat Jul 04, 2009 12:55 am

The driver for this hardware was not included in the image. I have added it in the latest test build. Please let me know whether or not it helps.
MiniMyth running on an Acer ApireRevo 3610 and a Zotac ZBOX-ID80-U. Find out more at my MythTV page.

tcrnek
New Member
Posts: 7
Joined: Sat May 05, 2007 6:20 pm

Re: Trust wireless keyboard KB-2950

Post by tcrnek » Sun Jul 05, 2009 11:38 am

Sorry for for nor responding earlier.
It works fine now. Thanks!

Post Reply