Success with EPIA-EK10000G

Talk about successully using hardware here.

Moderator: Pablo

Post Reply
hads
Member
Posts: 16
Joined: Tue Feb 06, 2007 9:45 pm

Success with EPIA-EK10000G

Post by hads » Tue Feb 06, 2007 10:33 pm

Hi all,

Just thought I would post a quick note to mention that I've had success so far with the EK10000G. I think sensors is about the only thing that isn't working at the moment.

I'm still waiting on the DVI breakout board to turn up so haven't actually got the box installed in it's final place yet.

Cheers,

hads

Pablo
Site Admin
Posts: 4182
Joined: Tue Dec 14, 2004 2:13 am
Location: La Jolla
Contact:

Post by Pablo » Tue Feb 06, 2007 11:34 pm

Thanks for the info.

Does either the vt1211 or w83627hf driver work for the sensors? If so, which one?

Also could you provide the output of:

Code: Select all

dmidecode -t baseboard

Code: Select all

dmidecode -t processor

Code: Select all

cat /proc/cpuinfo

Code: Select all

lspci -mn

Code: Select all

lsusb
MiniMyth running on an Acer ApireRevo 3610 and a Zotac ZBOX-ID80-U. Find out more at my MythTV page.

hads
Member
Posts: 16
Joined: Tue Feb 06, 2007 9:45 pm

Post by hads » Wed Feb 07, 2007 12:15 am

Aha! Thanks, I had tried vt1211 but not w83627hf. w83627hf works as can be seen below;

Code: Select all

root@enos:~ $ sensors
No sensors found!
Make sure you loaded all the kernel drivers you need.
Try sensors-detect to find out which these are.
root@enos:~ $ modprobe w83627hf
root@enos:~ $ sensors
w83697hf-isa-0290
Adapter: ISA adapter
VCore:     +0.98 V  (min =  +0.00 V, max =  +3.81 V)
+3.3V:     +3.28 V  (min =  +0.00 V, max =  +3.81 V)
+5V:       +5.00 V  (min =  +0.00 V, max =  +6.40 V)
+12V:     +12.22 V  (min =  +0.00 V, max = +14.47 V)
-12V:     -14.91 V  (min =  -1.59 V, max =  -8.33 V)       ALARM
-5V:       -7.71 V  (min =  +4.00 V, max =  -7.31 V)       ALARM
V5SB:      +5.46 V  (min =  +3.66 V, max =  +1.77 V)       ALARM
VBat:      +3.22 V  (min =  +0.90 V, max =  +2.08 V)       ALARM
fan1:        0 RPM  (min = 3125 RPM, div = 4)              ALARM
fan2:        0 RPM  (min = 16875 RPM, div = 4)              ALARM
temp1:       +32 C  (high =  +117 C, hyst =    +0 C)   sensor = diode
temp2:     +38.5 C  (high =  +120 C, hyst =  +115 C)   sensor = transistor
alarms:
beep_enable:
          Sound alarm enabled

Here's the info you requested;

Code: Select all

root@enos:~ $ dmidecode -t baseboard
# dmidecode 2.8
SMBIOS 2.3 present.

Handle 0x0002, DMI type 2, 8 bytes
Base Board Information
        Manufacturer:
        Product Name: CN400-8237
        Version:
        Serial Number:

Code: Select all

root@enos:~ $ dmidecode -t processor
# dmidecode 2.8
SMBIOS 2.3 present.

Handle 0x0004, DMI type 4, 35 bytes
Processor Information
        Socket Designation: Socket 370
        Type: Central Processor
        Family: <OUT>
        Manufacturer: VIA
        ID: 9A 06 00 00 3F BA 81 03
        Version: VIA C3
        Voltage: 0.9 V
        External Clock: 133 MHz
        Max Speed: 1500 MHz
        Current Speed: 1000 MHz
        Status: Populated, Enabled
        Upgrade: ZIF Socket
        L1 Cache Handle: 0x0008
        L2 Cache Handle: 0x0009
        L3 Cache Handle: Not Provided
        Serial Number:
        Asset Tag:
        Part Number:

Code: Select all

root@enos:~ $ cat /proc/cpuinfo
processor       : 0
vendor_id       : CentaurHauls
cpu family      : 6
model           : 9
model name      : VIA Nehemiah
stepping        : 10
cpu MHz         : 1000.128
cache size      : 64 KB
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 1
wp              : yes
flags           : fpu vme de pse tsc msr cx8 apic sep mtrr pge cmov pat mmx fxsr sse rng rng_en ace ace_en
bogomips        : 2002.57
clflush size    : 32

Code: Select all

root@enos:~ $ lspci -mn
00:00.0 "0600" "1106" "0259" "1106" "aa07"
00:00.1 "0600" "1106" "1259" "" ""
00:00.2 "0600" "1106" "2259" "" ""
00:00.3 "0600" "1106" "3259" "" ""
00:00.4 "0600" "1106" "4259" "" ""
00:00.7 "0600" "1106" "7259" "" ""
00:01.0 "0604" "1106" "b198" "" ""
00:0d.0 "0200" "1106" "3065" -r8d "1106" "0107"
00:0f.0 "0104" "1106" "3149" -r80 "1106" "aa07"
00:0f.1 "0101" "1106" "0571" -r06 -p8a "1106" "aa07"
00:10.0 "0c03" "1106" "3038" -r81 "1106" "aa07"
00:10.1 "0c03" "1106" "3038" -r81 "1106" "aa07"
00:10.2 "0c03" "1106" "3038" -r81 "1106" "aa07"
00:10.3 "0c03" "1106" "3038" -r81 "1106" "aa07"
00:10.4 "0c03" "1106" "3104" -r86 -p20 "1106" "3104"
00:11.0 "0601" "1106" "3227" "1106" "aa07"
00:11.5 "0401" "1106" "3059" -r60 "1106" "aa07"
01:00.0 "0300" "1106" "3118" -r02 "1106" "3118"

Code: Select all

root@enos:~ $ lsusb
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
Now I'm just trying to build my own version with a newer svn revision which isn't working. I'll make another post about that though.

Cheers!

Post Reply